Qingdao custom Steel Metal Progressive Microwave Oven Stamping Die Featured

•Hiparter made the microwave oven cavity, bottom plate and back panel.

•The material strip shown in the left picture is for the cavity progressive die. For the cavity, the material width is 720mm. The problems were successfully overcome, such as the distortion of strip during drawing process, products broken, can’t cut off neatly etc. Thus we got praise from customer.

 

 

Product Description :

Part Name: Progressive Microwave Oven Stamping Die



Part Material: JSC270D;

Material Thickness: 2mm;

ISO9001:2008  by SGS;

Made in Qingdao, China

Forming, Blanking,Forming, Trimming;

HS Code: 820730090;


Related progressive die :

Hiparter has 20+ experiences in designing and manufacturing Stamping Die. We have a variety of microwave oven and other home appliances stamping die manufacturing process capabilities.

 

Stamping Die Manufacturing Capacity :

1)Stamping die machining equipment more than 28 sets

2)Slow speed wire cutting machine and middle speed wire cutting machine more than 11 sets

3)Fully equipped with grinder machine, milling machine, drilling machine, NC machining, wire cutting machine, etc.

4)Almost all the machining process completed  in-house.

5)We can guarantee the quality and lead time.

 

Dies Processing :

Split dies drawings, mark processing methods and control processing quality.

In order to ensure that each stamping die is qualified before out our factory, we have a strict quality control mechanisms. We will inspect each stamping die as the following ways.

1) Hardness tester

2) Chemical analysis

3) Digital Measuring Projector

4) Dynamic Balancing Tester

5) Universal testing machine & Coordinate-Detector for CNC machining

If there is any quality problems, we will take full responsibility.

 

Customer acceptance die :

 

Welcome a trial order with your drawing! There are value-added services for you!

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • Outdoor Air Conditioner Stamping Die
    Outdoor Air Conditioner Stamping Die With more than 10 years rich experience on air conditioner stamping die, we can make almost every stamping parts for…
    Read 5899 times
  • Refrigerator metal bracket progressive die
    Refrigerator metal bracket progressive die 1)Product Used: Refrigerator bracket 2)Product Material: Galvanized sheet 3)Material Thickness: 1.4mm; 4)Die type:  Progressive die 5)Stages Quantity: 13 6)Cavity: 1+1…
    Read 7404 times
  • Gas Stove Stamping Die
    Gas Stove Stamping Die Part Name: gas stove control panel; Die exported to: Egypt; We have made almost all kinds of gas stove stamping…
    Read 7256 times
  • Microwave Oven Metal Parts
    Microwave Oven  Metal Parts Microwave oven metal parts include the sheet metal  U Side Panel, sheet metal top plate, base plate, etc. 1)Die material:…
    Read 5083 times
| + - | RTL - LTR