23L Microwave Oven Front Panel Frame Press Tool Stamping Featured

• Product Name: Microwave Oven Front Panel Frame;

• Type: Side door;

• Product Capacity: 23L ;

• Product Material: SUS304;

• Material Thickness: 0.5mm;

• Product Size: 483*262*42(mm)

 

Stages of the Press Tool Stamp :

• Reasonable stages arrangement, less issues, less repair;

• Have made molds for over 90% sheet metal parts of Microwave Oven;


Stages for Press Tool

Tool Type: Tandem tool;

Tool Stages:3

Press Tonnage: 160T


Tool Structure :

Microwave Oven Tool structure

Hiparter has 20+ experiences in designing and manufacturing Stamping Tooling. We have a variety of microwave oven panel and other home appliances stamping tooling manufacturing process capabilities.


Stamping Tooling Manufacturing Capacity :

1)Stamping tooling machining equipment more than 28 sets

2)Slow speed wire cutting machine and middle speed wire cutting machine more than 11 sets

3)Fully equipped with grinder machine, milling machine, drilling machine, NC machining, wire cutting machine, etc.

4)Almost all the machining process completed  in-house.

5)We can guarantee the quality and lead time.

 

Tools Processing :

Split tooling drawings, mark processing methods and control processing quality.

In order to ensure that each stamping tooling is qualified before out our factory, we have a strict quality control mechanisms. We will inspect each stamping tooling as the following ways.

1) Hardness tester

2) Chemical analysis

3) Digital Measuring Projector

4) Dynamic Balancing Tester

5) Universal testing machine & Coordinate-Detector for CNC machining

If there is any quality problems, we will take full responsibility.

 

Choose Hiparter, you will set your mind at rest!

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • water heater stamping parts
     water heater stamping parts Rich experience in making water heater stamping dies and water heater stamping parts. Have made kinds of stamping dies for…
    Read 5573 times
  • Gas Oven Mould
    Gas Oven Mould gas oven mould 1) mould fabrication with rich experience 2) mould type: stage stamping moulds with 4 steps 3) parts…
    Read 5413 times
  • Gas Cooker Control Panel
    Gas Cooker Control Panel Gas cooker button control panel, rich experience and skilled technologies in metal drawing, angle forming of control panel. Ever making…
    Read 5753 times
  • Microwave Oven U-section Stamping Die
    Microwave Oven U-section Stamping Die Place of Origin: Qingdao, China; Brand Name: Hiparter; Shaping Mode: Punching Mold; Product Material: Metal; Die Type: Progressive Die; Rich…
    Read 14426 times
| + - | RTL - LTR