Air Conditioner Outdoor Unit Part Progressive Die Featured

1.Tool type: Stamping mold;

2.Tool life:More than 500,000 shoots;

3.Machining Tolerance:0.02mm:

4.Tool Material:Mo-Cr steel, CR12MOV, CR12, 45#;

5.Standard parts: PUNCH, MISUMI Standard;

6.Design software:AutoCAD, Solidworks, UG;Product Used;

7.Process Procedure: Cutting, Piercing, Bending, Forming, etc.


Progressive Die:

The air conditioner outdoor unit sheet metal parts, including the entire outdoor unit ,such as the front cover, left and right side panels, chassis, top cover and motor bracket, as well as tube sheets and internal brackets cooperated with Hisense, Haier.

 Air Conditioner Outdoor Unit Part Progressive Die

 

Air Conditioner Sheet Metal Stamping Mold Show:

1) Air Conditioner Sheet Metal Shell Parts,we can design according to the product drawings or samples provided by customers.

With rich experience, we can give you some advice. Also, we will choose less stages to realize the parts, so that you can save mold cost and improve the productivity.

Air Conditioner Panel Stamping Die

2)This die is designed to accommodate various process procedures, including blanking, cutting, piercing, bending and forming, allowing for versatility in manufacturing applications.

3)Provide customers inspection reports and samples for confirmation.

Our advantages:

1)4~6 weeks lead time

2)Update stamping die building progress to customer weekly, control project progress to ensure project schedule

3)Exported to over 30 counties

Air Conditioner Panel Stamping Die 2

Our services:

1.In-time response by telephone or mails for questions;

2.In-time communication with you on the technical points.

3.In-time sending die machining progress and finishing schedule.

4.In-time die testing and samples delivery.

5.In-time die delivery.

Air Conditioner Panel Stamping Die

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • Table Cooker Stamping Die
    Table Cooker Stamping Die Three Burners table gas cooker, with 0.5mm SPCC, length 600mm, width 330mm. Made by 5 steps dies, drawing, blanking, trimming,…
    Read 5683 times
  • Air Conditioner Motor Base
    Air Conditioner Motor Base Specialized in making stamping dies and stamping parts for air conditioner since 2003. We have made dies and parts for…
    Read 5249 times
  • Qingdao Factory Microwave Oven Metal Press Panel Stamping Too
    Qingdao Factory Microwave Oven Metal Press Panel Stamping Too • With  ISO9001:2008 certified; • Good suggestions help customers improve there design. • Tthere is an innovative, dedicated and experienced…
    Read 1385 times
  • Square flange of water heater
    Square flange of water heater Hiparter was professional with flanges of water heater stamping dies and stamping parts. With almost 10 years' rich experience in…
    Read 5568 times
| + - | RTL - LTR