Rice Cooker Middle Pot Stamping Die Featured

Hiparter--very famous rice cooker middle pot manufacturer.

Established in 2003, and located in Qindao.

Die Specification:

1. Product name: Rice cooker middle pot

2.Produce material: T=0.5mm SPCE

3. Die type: Single-stage stamping die

4. Die precision: 0.02mm

5. Die procedure: 6 steps

6. Tool life: 300,000shots

7. Die material: SKD11, 45#

Related Stamping Die:

Rice cooker middle pot stamping die

  • Part Unfolded Diameter: 430mm;
  • Die size: 505*420*369mm;
  • Fine maching in house;
  • Use press machine;
  • Press Tonnage: 160T;
  • Exported in 2012;
  • HS Code:8207300090 in China Customs.

Die Trial Parts:

Rice Cooker Middle Pot

Die Trial Parts.

For different material, the tensile properties is different. So, when try the dies, we hope customer can supply us some material so that we can try the dies with your material, and guarantee the dies will produce the parts without any problem when they are used in your factory.

Part with Wrinkle:

Rice cooker middle pot die trial part

When draw this part, there will be some wrinke. So, you need to choose the right matrial. Of course, we try our best to fine and polish the punch and insert, also to change the tolerance, to avoid this phenomenon.

 

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • Rice Cooker Stamping Die
    Rice Cooker Stamping Die China famous rice Cooker Stamping Die maker--Hiparter. With 13 years rich experience since 2003. 1. Die type: single-stage stamping dies 2.…
    Read 6067 times
  • Microwave Stove Cover Part
    Microwave Stove Cover Part microwave oven cover part 1) part material:SUS430 2) Die type: stage stamping die 3) Die material: SKD11, Cr12mov 4) Exported…
    Read 6163 times
  • Flange of Water Heater
    Flange of Water Heater Water heater heater flange stamping dies manufacturer--Hiparter. With about 10 years' rich experience since 2003; Located in Qingdao, China,  the…
    Read 5297 times
  • Microwave Oven Inner Metal Door
    Microwave Oven Inner Metal Door The microwave oven cavity/chassis and door are made by metal-forming techniques, and then painted by electro-deposition, in which electric current…
    Read 13207 times
| + - | RTL - LTR