Microwave Oven U-section Stamping Die Featured

  • Place of Origin: Qingdao, China;
  • Brand Name: Hiparter;
  • Shaping Mode: Punching Mold;
  • Product Material: Metal;
  • Die Type: Progressive Die;
  • Rich experience over 12 years;
  • ISO9001:2008;
  • HS code:8207300090;
  • Spare parts: MISUMI;
  • Offer detailed 2D/3D drawings.
Related Stamping Die  Pictures:
With the fast development of microwave oven, the stage stamping dies can not meet the requirement of  production. So, we improve the technology, apply progressive die to produce the microwave oven u-section.
China microwave oven stamping die

OUR ADVANTAGES:

  • Rich experience from 2003;
  • Reasonable die structure to save cost;
  • Precision machining to guarantee the quality;
  • Communication on time;
  • Guarantee delivery time;
  • Many years to exported dies and moulds.
microwave oven stamping die

Metal Strip for Progessive Die:

Metal Strip for Progessive Die

Discuss on Spot:

Discuss the stamping die on spot

 

Welcome you send us samples or drawings to inquiry. We will quote  you the best price with high quality on time.

Before delivery the stamping die, we can paint it with the color you prefer.

Paint the stamping die with green color:

paint the stamping die with green color

The cover or outer case of the microwave oven is usually a one-piece, wrap-around metal enclosure. The oven's inside panels and doors are made of galvanized or stainless steel and are given a coating of acrylic enamel, usually light in color to offer good visibility.

China microwave oven stamping die, choose Hiparter!  Hiparter, Your Smart Choice!

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • Gas Stove Working Table Stamping Moulds
    Gas Stove Working Table Stamping Moulds Gas stove classic working table, 60*90 cm, stainless steel, exported to Indonesia. Batch stamping production in house, under 315 hydraulic…
    Read 5981 times
  • Multi-door Refrigerator sheet metal bracket progressive die
    Multi-door Refrigerator sheet metal bracket progressive die 1.Tool type: Progressive stamping die; 2.Tool life:More than 500,000 shoots; 3.Machining Tolerance:0.02mm: 4.Tool Material:Mo-Cr steel, CR12MOV, CR12, 45#; 5.Standard parts:…
    Read 1144 times
  • Table Cooker Stamping Die
    Table Cooker Stamping Die Three Burners table gas cooker, with 0.5mm SPCC, length 600mm, width 330mm. Made by 5 steps dies, drawing, blanking, trimming,…
    Read 6100 times
  • Flange of Water Heater
    Flange of Water Heater Water heater heater flange stamping dies manufacturer--Hiparter. With about 10 years' rich experience since 2003; Located in Qingdao, China,  the…
    Read 5580 times
| + - | RTL - LTR