Auto Seat Recliner Stamping Die

Discuss auto parts stamping die

Parameter: 1) Part Material: SPCD270; 2) Material Thickness: 2mm; 3) Unfolded Size: 341*218*2.0;…
Parameter: 1) Part Name: Auto Seat Recliner Sheet Metal Part; 2) Part…
Parameter: Metal Bracket Reinf  LH/RH Stamping Die 1) Part material: SPCC; 2)…
Auto Plate Tiebar  LH  of GM truck, material SPCD270. Die stages: drawing,…
Metal Seat used on public bus, 1.5mm ST37, mult-stages moulds pressed. Batch production…
Auto Lock parts, progressive die stamped, 0.7mm SPCC. Bending angle 90 degree+/-0.1mm.…
Automotive Seat Metal Frame Die stages: flanging, forming, trmming, drawing etc
Automotive Seat  Parts        

Latest Auto Parts Stamping Dies

  • UPPER/LOWER NOZZLE STAMPING DIE
    UPPER/LOWER NOZZLE STAMPING DIE DTR for FCA;Shaping Mode: Punching Mold;Product Material: SPHC;Thickness:1.6mm;Die Type: Progressive Die+Singe Stage Die;Die Materail:SKD11,Cr12mov, 45#;10HZ UPPER/LOWER NOZZLEISO9001:2008;HS code:8207300090;Spare parts: MISUMI;…
    Read 404 times
  • HYUNDAI Bracket FR Bumper Side SUPT LH/RH
    HYUNDAI Bracket  FR Bumper Side SUPT LH/RH Product Material: SGACC;Thickness:1mm;Die type: Progressive die;Stages:14;Die Material:SKD11;Spare Parts: MISUMI standard.Rich experience over 13 years;ISO9001:2008;For HYUNDAI cars.   Related Stamping Die…
    Read 314 times
  • Automotive Oil Bracket Stamping Die
    Automotive Oil Bracket Stamping Die Die Specification: Die No.: HPD20161001; Part Material: SAPH440; Material Thickness: 2.6mm; Unfolded sizes: 186*67; Die sizes: 1150*500*440; Press  Machine: 250T; Die Type: Progressive…
    Read 433 times
  • Automotive Internal Reinf Stamping Die
    Automotive Internal Reinf Stamping Die Parameter: 1) Part Material: JSC270C; 2) Material Thickness: 1.2mm; 3) Unfolded Size: 1360*120*1.2; 4) Stages: Drawing, Blanking; 5) HS Code: 820730090;…
    Read 896 times
| + - | RTL - LTR