Microwave Oven Stamping Die
We have made stamping dies for almost all the sheet metal parts for microwave oven. Include the oven sheet metal case, oven front panel, back panel, top panel, sheet metal base, U section, door panel, U casing, and so on. Some of the dies are progressive dies, some are stage dies.
The microwave oven cavity/chassis and door are made by metal-forming techniques, and…
Tagged under
Made in China; Product: Microwave oven; Capacity: 18L, 20L,21L,23L,25L,etc. Make stamping dies…
Tagged under
Place of Origin: Qingdao, China; Brand Name: Hiparter; Shaping Mode: Punching Mold;…
Tagged under
Product Name: Microwave Oven Front Panel; Die type: Single stage die; Die material:…
Excellent China progressive dies supplier---Hiparter! 1)ISO9001:2008; 2)Rich experience: over 12 years; 3)Customers:…
Tagged under
This Microwave Oven Metal Case is made by progressive die, we improve…
Microwave oven metal parts include the sheet metal U Side Panel, sheet…
metal moulds for micro wave oven 1) rich experience on metal stamping…
microwave stove sheet metal parts 1) parts material: SUS430 2) die material:SKD11,…
Tagged under
door mould for microwave oven 1) rich experience on microwave oven mould…
microwave oven cover part 1) part material:SUS430 2) Die type: stage stamping…
1) Part material: ST14; 2) Material Thickness:0.5mm; 3) Die life:500,000 shots; 4)…
Tagged under
Microwave oven stamping die stamping die manufacturer from 2003, making moulds for…
Home Appliance Parts
Tags
air jet loom reed
Aluminum Parts
Automotive Parts Stamping Die
auto parts
china progressive die
copper part progression die
Curling Dies
Deep Drawing Die
Drawing Dies
Home Appliance Part
Manifold Gasket
Microwave Oven
Progressive Die
progressive dies
Refrigerator Stamping Die
Rice Cooker
undefined
Washing Machine
Latest Home Appliance Dies
-
water heater stamping parts
Read 1040 times
Rich experience in making water heater stamping dies and water heater stamping parts. Have made kinds of stamping dies for… -
Barbecue Oven Back Cover
Read 1085 times
barbecue oven back cover 1) mold type:stage stamping mold 2) mold life:300,000 shots 3) mold material:SKD11,CR12MOV, SCM and so on -
Microwave Stove Door Panel
Read 1108 times
1) Part material: ST14; 2) Material Thickness:0.5mm; 3) Die life:500,000 shots; 4) Punch of standard: PUNCH; 5) Die Type: Stage;… -
China Microwave Oven Stamping Die
Read 1595 times
Made in China; Product: Microwave oven; Capacity: 18L, 20L,21L,23L,25L,etc. Make stamping dies for almost all the sheet metal part of…