Air Conditioning Front Panel

Hiparter, as a famous stamping dies and parts manufacturer in China, is professional in Air conditioning dies and parts.

1) Parts use:Air conditioning front panel

2) Parts material: ST02Z, 0.6mm

3) Mold type: Stage stamping mold

4) Mold material: Cr12mov, Cr12

5) Mold procedure: forming, piercing, hole- flanging, bending etc.

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • Table Cooker Stamping Die
    Table Cooker Stamping Die Three Burners table gas cooker, with 0.5mm SPCC, length 600mm, width 330mm. Made by 5 steps dies, drawing, blanking, trimming,…
    Read 9092 times
  • Air Conditioner Outside Machine Top Plate
    Air Conditioner Outside Machine Top Plate 1) Part material: T=0.8mm, ST02Z; 2) Die material:Cr12Mov; 3) Die type: single stamping die; 4) Die Procedure: drawing, side piercing,…
    Read 11182 times
  • Four Burners Cooking Plate
    Four Burners Cooking Plate 50*60cm gas cooking plate, mult- stages moulds, die core steel SKD11, including punches, inserts and easy wearing parts. mould life:…
    Read 9338 times
  • Outdoor Air Conditioner Side Plate
    Outdoor Air Conditioner Side Plate outdoor air conditioner side plate   As a professional stamping die manufacturer, we have rich experience on home appliance stamping…
    Read 10197 times
| + - | RTL - LTR