Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • Air Conditioner Outside Machine Top Plate
    Air Conditioner Outside Machine Top Plate 1) Part material: T=0.8mm, ST02Z; 2) Die material:Cr12Mov; 3) Die type: single stamping die; 4) Die Procedure: drawing, side piercing,…
    Read 9749 times
  • Gas Oven Mould
    Gas Oven Mould gas oven mould 1) mould fabrication with rich experience 2) mould type: stage stamping moulds with 4 steps 3) parts…
    Read 7869 times
  • Table Cooker Stamping Die
    Table Cooker Stamping Die Three Burners table gas cooker, with 0.5mm SPCC, length 600mm, width 330mm. Made by 5 steps dies, drawing, blanking, trimming,…
    Read 7984 times
  • Air Conditioner Outdoor Unit Part Progressive Die
     Air Conditioner Outdoor Unit Part Progressive Die 1.Tool type: Stamping mold; 2.Tool life:More than 500,000 shoots; 3.Machining Tolerance:0.02mm: 4.Tool Material:Mo-Cr steel, CR12MOV, CR12, 45#; 5.Standard parts: PUNCH,…
    Read 6370 times
| + - | RTL - LTR